Maximum check stresses per element (material non-linear analysis) (Output Table)

Data description/Result options:

ELEM:

Number of element where stress calculations have been performed at mid cross-section

sX-E-M:

Maximum (elastic) stress over wall thickness in axial direction (1)

sF-E-M:

Maximum (elastic) stress over wall thickness in circumferential direction (1)

tZ-E-M:

Maximum (elastic) shear stress over wall thickness (1)

s12max-E-M:

Maximum (elastic) principal stress over wall thickness (1)

(Blank if no tensile stress)

s12min-E-M:

Minimum (elastic) principal stress over wall thickness (1)

(Blank if no compressive stress)

tmax-E-M:

Maximum (elastic) principal shear stress over wall thickness (1)

sEq-E-M:

Maximum (elastic) equivalent stress over wall thickness (1)

sHOOP-M:

Maximum circumferential normal stress due to internal overpressure (1)

(The hoop stress is calculated taking into account the outer pipe diameter D, the minimum wall thickness T-min and the load factor.)

 

 

The number of rows is the number of specified cross-sections (accumulated).

 

Note 1:

Absolute (signed) maximum over circumference.

---

H622621 (last modified: Jan 15, 2025)

See also:

Table description

Table error description