Overview list of general cross-sectional data for stress/strain calculations (Output Table)

Data description/Result options:

ELEM:

Number of element where stress/strain calculations are to be performed at the mid cross-section

RADIUS:

Specified radius of bend at element

(Blank if element is a straight pipe element)

DOUT:

Specified outer diameter of pipe at element

WALL:

Specified wall thickness of pipe at element

LAMBDA:

Specified horizontal soil support ratio at element (1)

ANGOCC:

Calculated soil support angle at element due to loads SOILNB and/or TOPLOAD (1)

SH-ALLOW:

Calculated allowable hoop stress in element

(Allowable value according to ASME B31.8)

SLr-ALLOW:

Calculated allowable longitudinal stress in element for restrained condition (2)

(Allowable value according to ASME B31.8)

SLu-ALLOW:

Calculated allowable longitudinal stress in element for unrestrained condition (3)

(Allowable value according to ASME B31.8)

SC-ALLOW:

Calculated allowable combined stress in element

(Allowable value according to ASME B31.8)

SF-ALLOW:

Calculated allowable circumferential stress in element

(Allowable value according to ASME B31.8)

LOADTYPE:

Loading type for element

(Loading type according to ASME B31.8)

AXDISP:

Axial restraint condition for element

 

The number of rows is the number of specified cross-sections (accumulated).

 

Note 1:

Undefined if there is no soil.

Note 2:

Undefined if AXDISP = Unrestrained.

Note 3

Undefined if AXDISP = Restrained.

---

H640501 (last modified: Jan 15, 2025

See also:

Table description

Table error description