<< Click here to display Table of Contents >> Navigation: Tables Reference > By Design Function > Design function 6.2: Cross-Section Behaviour {General, Material Linear} [CALSECT] > Input tables > Weighing factors stress components [SWEIGH]:

Data description/conditions

Contents

Specification of weighing multiplication factors for stress components (Input Table)

Data description/conditions:

Identifier (1): (toggleable)

Identification name from where stress weighing factors must be applied

Required

SXUB0:

Weighing multiplication factor for stress component SXUB0

SXUB1:

Weighing multiplication factor for stress component SXUB1

SXUBH:

Weighing multiplication factor for stress component SXUBH

SXIOSH:

Weighing multiplication factor for stress components SXI/OSH

SFIOSH:

Weighing multiplication factor for stress components SFI/OSH

SFUBA:

Weighing multiplication factor for stress component SFUBA

SFURA:

Weighing multiplication factor for stress component SFURA

SXIORA:

Weighing multiplication factor for stress components SXI/ORA

SFIORA:

Weighing multiplication factor for stress components SFI/ORA

≥ 0.

[Default: 1.]

(For explanation of stress components see DATA DESCRIPTION of tables PSTRMAX, BSTRMAX and RSTRMAX. Weighing factors are used only for calculation of stresses in tables CSTRMAX and CSTRESS.
Weighing factors are valid up to the element in the next row.)

Note 1:

It is notified explicitly that this specification differs from all other similar specifications (except in table SUPANG) , because the specification of the function is a constant over specified areas, meaning there is no interpolation of elements data between two reference points.

H620121 (last modified: Jan 25, 2026